Introduction: Microduct Reducer connectors for quick and easy splicing of microducts allows interconnection between microducts that are difference in outer diameters, the body is transparent for easy fault location during Installation, to enable cable blowing, the Reducer connector is designed to operate at 15 bars without leakage. The Push-fit reducer connectors manufactured with high quality materials and transparent body assure easy and quick installation, connector can be re-used 10 times remaining maintained the high-performance requirements for air- blown installation systems. Application: The Reducer allows interconnection between microducts that are difference in outer diameters. Usually, this is used in the point of transition from DB to DI microducts entering the office, house. Operation Features: The reducer connectors are tested for best functionality in combination with the air blown fibers unit and air blown fibers cables. • Easy “push-in” installation • For 3 to 20 mm O.D. microducts • Material: Clear PC • Leakage Pressure: 15 bar • Negative Pressure: 750mm Hg • Proof Pressure: 25 bar • Temperature Range: -10 ~60℃ • Burst Pressure: > 25.5kgf/㎠ • Water Immersion test: Pass (Water proof) • Expected Life time: Minimum 20 years • hydraulic pressure test: Resisting at 13.5kgf/㎠ for 2 minutes