Introduction: FTTH Splice on Fast Connector is a perfect solution for field working and FTTH connection. It is widely used where needed for a quick connection, providing a quick assembly and stable performance. When engineers work in the field for installation, maintenance, repair of optical fiber, or FTTH indoor termination, they can use it easily because it has no epoxy and no polishing. Fast filed connectors normally are SC, LC and FC fast connectors, singlemode or multimode and it is cost-effective solution for FTTH projects. Application: FTTH Splice on Fast Connector Assembly SC Fusion splice on connector is optical fiber fast connector, which used for splicing point inside the connector end, equivalently eliminate the pigtails when splicing. The advantage is no need additional protection after splice, such as splice tray, splice closure, distribution box. In contract to the design of mechanical splice connector, it saves V-groove mechanical connector maintenance and operation cost • FTTH Termination • In-House termination • Fast repair of optical fiber Operation Features: FTTH Splice on Fast Connector is a perfect solution for field working and FTTH connection. It is widely used where needed for a quick connection, providing a quick assembly and stable performance with the following features • Field-termination connector with no epoxy or polishing required • No matching gel enables low reflection and high reliability Splicing point is inside of the connector • No additional splicing work required • Easily assembled with one-touch, push-pull system • Used for φ3.0mm, φ2.0mm cable and 3x2mm drop cable etc. • The fusion splice position can be protected by the heat shrinkable tube inside, not easy broken Mechanical Performance Test compliance: Applicable for cable: 0.9mm, 2.0mm, 3.0mm indoor cable or Drop cable Fiber type: SM G652D, 657A & 657B Polishing Type: UPC or APC Insert loss: ≤ 0.3dB Return loss: UPC≥50dB, APC≥60dB Tensile strength: >60 N Operation Temperature: -40 to +60°C