Introduction: Fan Out Fiber Optic Patch Cord also named as Fiber Optic Patch Cable, are made from multi-cores cables and pre-terminated at each end with fiber optic connectors. Fiber optic connectors on the end of fiber patch cord cables can be of various types, including FC, SC, ST, LC, DIN and MPO etc. The purpose of fiber optic patch cord is to connect one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center Application: Fan Out Fiber Optic Patch Cord are necessary for almost all networks. Their ability to carry massive volumes of data at high speeds makes them ideal for the backbone of most networks. They connect everything from data centers to any device within the network. Fiber patch cables have become an essential component of enterprise data networks. due to the variety of fiber patch cables installation requirements, a fiber optic patch cord has fiber optic connectors such SC, ST, LC, FC and more at either end. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks • WAN fiber networks Operation Features: Fan Out Fiber Optic Patch Cord Connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at both ends. The type of cable fiber and connector and the length of the patch cords can be freely specified by the customer • Fiber type is a Single mode fiber G652D, G657A1 and G657A2, Multimode fiber OM1, OM2, OM3 and OM4 are available • Fiber Patch Cord length 1, 2, 3meter other length are available • Available for simplex, duplex and multi-cores • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • Cable flame resistant rate IEC60332-3 standard • High reliability • Customer lengths and connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC, MTRJ, MPO etc. Cable Diameter: 2.0mm or 3.0mm Polish Interface Type: PC, UPC, APC Outer Jacket: PVC or LSZH or Armored etc. Jacket Color: SM ”Yellow”, OM2 ”Orange”, OM3 :Aqua”, OM4 ”Pink” Operation Temperature: -20 to +70°C Storage Temperature: -40 to +70°C