an abstract photo of a curved building with a blue sky in the background

AirWave Microduct

You didn’t come this far to stop

DBAL Microduct 5/3.5

Direct Bury Aluminum Microduct

DBAL Microduct Diameter 5/3.5mm

Operation Features:

The duct assemblies are available in several versions with 1 to 24 and 24+1 microducts.

Each microduct has an outer/inner diameter of 5/3.5 mm. These are suitable for installation of air blown fibers. The center duct of 24+1-way assemblies is 10/8 resp. 12/10 mm and can be used for blowing in a micro cable.

For direct burial
1, 2, 4, 7, 12, 19, 24 or 24+1 over-sheathed ducts
5/3.5 mm microducts
Low friction inner surface for maximum installation lengths
Aluminum moisture barrier
Excellent environmental properties
Silicone coated inner tube
Material HDPE Inner tube and Outer sheath
Maximum Air Pressure (Blowing) 15bar

Direct Bury Aluminum “DBAL” Microduct Assemblies consist of tubes with a smooth or ribbed inner surface that enables an air blown installation of micro cables. The micro ducts are sheathed with two layers without moisture barrier. It provides excellent protection from the physical environment withstanding significant amount of pressure by pulling, and it is easy to branch off for network expansion.

Application:

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown unit fibers cables. The duct assemblies are bundled with HDPE sheath depending on configuration. The design makes the ducts suitable for installation directly into the ground.

Download Datasheet