Outdoor Fiber Termination Box is a compact fiber management product of small size. It is widely adopted in FTTH cabling for both fiber cabling and cable management. While typical fiber terminal boxes are equipped with from 4 to 48 ports fiber are available in our product range. They are often installed with SC or LC adapters on the panel, either on the wall or put in horizontal line

Introduction: Fiber Access Terminal Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box Application: Fiber Access Terminal Box is an outdoor are necessary for almost all networks. Our high-quality fiber optic access terminal is suitable in office or building floors and it is able to provide end users with optical access or data access. due to the variety of fiber access terminal box installation requirements, a fiber optic connectors such SC, ST, LC, FC and more. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks Operation Features: Fiber Access Terminal Box is an outdoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall terminal box is made of PC/ABS plastic and designed for use in residential and business applications for the termination of up to 4 fibers. It can hold max 4 simplex adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution • Integrated with splice cassette and cable management rods • Compact structure and perfect fiber management • Fiber mode is a singlemode or multimode fiber are available • Available up to 4 ports • Suitable for the fusion splice or mechanical splice • Fiber connector types FC, SC, ST and LC etc. • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • Water-proof design with IP-65 Protection level • High reliability and reasonable inner space design • Customer connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC etc. Polish Interface Type: PC, UPC, APC Size (H×W×D): 191×120×44mm other are available Splice Capacity: 4 Cores (SC) or 8 Cores (LC) Material: PC/ ABS plastic material Installation Models: Wall Mounted Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C

Introduction: Fiber Access Terminal Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box Application: Fiber Access Terminal Box is an outdoor are necessary for almost all networks. Our high-quality fiber optic access terminal is suitable in office or building floors and it is able to provide end users with optical access or data access. due to the variety of fiber access terminal box installation requirements, a fiber optic connectors such SC, ST, LC, FC and more. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks Operation Features: Fiber Access Terminal Box is an outdoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall terminal box is made of PC/ABS plastic and designed for use in residential and business applications for the termination of up to 8 fibers. It can hold max 8 simplex adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution • Integrated with splice cassette and cable management rods • Compact structure and perfect fiber management • Fiber mode is a singlemode or multimode fiber are available • Available up to 8 ports • Suitable for the fusion splice or mechanical splice • Fiber connector types FC, SC, ST and LC etc. • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • Water-proof design with IP-65 Protection level • High reliability and reasonable inner space design • Customer connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC etc. Polish Interface Type: PC, UPC, APC Size (H×W×D): 228×182×55 mm other are available Splice Capacity: 8 Cores (SC) or 16 Cores (LC) Entry ports and cable dia: 1×φ25mm and 3×φ15mm other are available Material: PC/ ABS plastic material Installation Models: Wall Mounted Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C

Introduction: Fiber Access Terminal Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box Application: Fiber Access Terminal Box is an outdoor are necessary for almost all networks. Our high-quality fiber optic access terminal is suitable in office or building floors and it is able to provide end users with optical access or data access. due to the variety of fiber access terminal box installation requirements, a fiber optic connectors such SC, ST, LC, FC and more. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks Operation Features: Fiber Access Terminal Box is an outdoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall terminal box is made of PC/ABS plastic and designed for use in residential and business applications for the termination of up to 12 fibers. It can hold max 12 simplex adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution • Integrated with splice cassette and cable management rods • Compact structure and perfect fiber management • Fiber mode is a singlemode or multimode fiber are available • Available up to 12 ports • Suitable for the fusion splice or mechanical splice • Fiber connector types FC, SC, ST and LC etc. • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • Water-proof design with IP-65 Protection level • High reliability and reasonable inner space design • Customer connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC etc. Polish Interface Type: PC, UPC, APC Size (H×W×D): 320×240×100 mm other are available Splice Capacity: 12 Cores (SC) or 24 Cores (LC) Entry ports and cable dia: 2×φ25mm and 16×φ15mm other are available Material: PC/ ABS plastic material Installation Models: Wall Mounted Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C

Introduction: Fiber Access Terminal Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box Application: Fiber Access Terminal Box is an outdoor are necessary for almost all networks. Our high-quality fiber optic access terminal is suitable in office or building floors and it is able to provide end users with optical access or data access. due to the variety of fiber access terminal box installation requirements, a fiber optic connectors such SC, ST, LC, FC and more. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks Operation Features: Fiber Access Terminal Box is an outdoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall terminal box is made of PC/ABS plastic and designed for use in residential and business applications for the termination of up to 24 fibers. It can hold max 24 simplex adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution • Integrated with splice cassette and cable management rods • Compact structure and perfect fiber management • Fiber mode is a singlemode or multimode fiber are available • Available up to 24 ports • Suitable for the fusion splice or mechanical splice • Fiber connector types FC, SC, ST and LC etc. • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • Water-proof design with IP-65 Protection level • High reliability and reasonable inner space design • Customer connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC etc. Polish Interface Type: PC, UPC, APC Size (H×W×D): 350*340*120mm other are available Splice Capacity: 24 Cores (SC) or 48 Cores (LC) Entry ports and cable dia: 2×φ25mm and 16×φ15mm other are available Material: PC/ ABS plastic material Installation Models: Wall Mounted Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C

Introduction: Fiber Access Terminal Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box Application: Fiber Access Terminal Box is an outdoor are necessary for almost all networks. Our high-quality fiber optic access terminal is suitable in office or building floors and it is able to provide end users with optical access or data access. due to the variety of fiber access terminal box installation requirements, a fiber optic connectors such SC, ST, LC, FC and more. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks Operation Features: Fiber Access Terminal Box is an outdoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall terminal box is made of high-quality metal material and designed for use in residential and business applications for the termination of up to 24 fibers. It can hold max 24 simplex adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution • Integrated with splice cassette and cable management rods • Compact structure and perfect fiber management • Fiber mode is a singlemode or multimode fiber are available • Available up to 24 ports • Suitable for the fusion splice or mechanical splice • Fiber connector types FC, SC, ST and LC etc. • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • Water-proof design with IP-65 Protection level • High reliability and reasonable inner space design • Customer connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC etc. Polish Interface Type: PC, UPC, APC Size (H×W×D): 350*340*120mm other are available Splice Capacity: 24 Cores (SC) or 48 Cores (LC) Entry ports and cable dia: 4×φ25mm other are available Material: High-quality metal material Installation Models: Wall Mounted Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C