Fiber Optic Pigtail refers to a half-jumper-like connector used to connect fiber and fiber couplers. It includes a jumper connector and a length of fiber. FTTH cable pigtails which are made from standard FTTH drop cables
Introduction: Single mode Fiber Optic Pigtails are made from single cables and pre-terminated at one end with fiber optic connectors. Fiber optic connectors on the end of fiber pigtails cables can be of various types, including FC, SC, ST, LC, DIN and MPO etc. The purpose of fiber optic pigtails is to connect fiber optic core to one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center Application: Single mode Fiber Optic Pigtails are necessary for almost all networks. Their ability to carry massive volumes of data at high speeds makes them ideal for the backbone of most networks. They connect everything from data centers to any device within the network. Fiber Pigtails have become an essential component of enterprise data networks. due to the variety of fiber pigtails installation requirements, a fiber optic pigtail has fiber optic connectors such SC, ST, LC, FC and more at either end. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks • WAN fiber networks Operation Features: Single mode Fiber Optic Pigtails connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at one end. The type of cable fiber and connector and the length of the pigtails can be freely specified by the customer • Fiber type is a Single mode fiber G652D, G657A1 are available • Fiber Optic Pigtail length 1, 1.5, 2meter other length are available • Available for simplex and multi-cores • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • High reliability • Customer lengths and connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode Connector type: SC, FC, ST, LC, MTRJ, MPO etc. Cable Diameter: 0.9mm or 1.6mm Polish Interface Type: PC, UPC, APC Jacket Color: Yellow Insertion Loss: ≤0.2dB Return Loss: ≥60dB Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C
Introduction: Multimode Fiber Optic Pigtails are made from single cables and pre-terminated at one end with fiber optic connectors. Fiber optic connectors on the end of fiber pigtails cables can be of various types, including FC, SC, ST, LC, DIN and MPO etc. The purpose of fiber optic pigtails is to connect fiber optic core to one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center Application: Multimode Fiber Optic Pigtails are necessary for almost all networks. Their ability to carry massive volumes of data at high speeds makes them ideal for the backbone of most networks. They connect everything from data centers to any device within the network. Fiber Pigtails have become an essential component of enterprise data networks. due to the variety of fiber pigtails installation requirements, a fiber optic pigtail has fiber optic connectors such SC, ST, LC, FC and more at either end. • Optical communication networks • LAN fiber networks • WAN fiber networks Operation Features: Multimode Fiber Optic Pigtails connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at one end. The type of cable fiber and connector and the length of the pigtails can be freely specified by the customer • Fiber type is a Multimode fiber OM1, OM2, OM3 and OM4 are available • Fiber Optic Pigtail length 1, 1.5, 2meter other length are available • Available for simplex and multi-cores • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • High reliability • Customer lengths and connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Multimode Connector type: SC, FC, ST, LC, MTRJ, MPO etc. Cable Diameter: 0.9mm or 1.6mm Polish Interface Type: PC, UPC Jacket Color: OM2 ”Orange”, OM3 :Aqua”, OM4 ”Pink” Insertion Loss: ≤0.3dB Return Loss: ≥20dB Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C
Introduction: FTTH Fiber Optic Pigtails are made from multi-cores cables and pre-terminated at one end with fiber optic connectors. Fiber optic connectors on the end of fiber pigtails cables can be of various types, including FC, SC, ST, LC, DIN and MPO etc. The purpose of fiber optic pigtails is to connect fiber optic core to one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center Application: FTTH Fiber Optic Pigtails are necessary for almost all networks. Their ability to carry massive volumes of data at high speeds makes them ideal for the backbone of most networks. They connect everything from data centers to any device within the network. Fiber Pigtails have become an essential component of enterprise data networks. due to the variety of fiber pigtails installation requirements, a fiber optic pigtail has fiber optic connectors such SC, ST, LC, FC and more at either end. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks • WAN fiber networks Operation Features: FTTH Fiber Optic Pigtails connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at one end. The type of cable fiber and connector and the length of the pigtails can be freely specified by the customer • Fiber type is a Single mode fiber G652D, G657A1 and G657A2, Multimode fiber OM1, OM2, OM3 and OM4 are available • Fiber Optic Pigtail length 1, 1.5, 2 and 3meter other length are available • Available for multi-cores • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • High reliability • Customer lengths and connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC, MTRJ, MPO etc. Cable Diameter: 0.9mm or 1.6mm Polish Interface Type: PC, UPC, APC Jacket Color: SM ”Yellow”, OM2 ”Orange”, OM3 :Aqua”, OM4 ”Pink” Insertion Loss: SM ≤0.2dB, MM ≤0.3dB Return Loss: SM ≥60dB, MM ≥20dB Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C
Introduction: MPO Fiber Optic Pigtails are made from multi-cores cables and pre-terminated at one end with fiber optic connectors. Fiber optic connectors on the end of fiber pigtails cables can be of various types, including FC, SC, ST, LC, DIN and MPO etc. The purpose of fiber optic pigtails is to connect fiber optic core to one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center Application: MPO Fiber Optic Pigtails are necessary for almost all networks. Their ability to carry massive volumes of data at high speeds makes them ideal for the backbone of most networks. They connect everything from data centers to any device within the network. Fiber Pigtails have become an essential component of enterprise data networks. due to the variety of fiber pigtails installation requirements, a fiber optic pigtail has fiber optic connectors such SC, ST, LC, FC and more at either end. • Ideal for FTTH/FTTX network • Optical communication networks • LAN fiber networks • WAN fiber networks Operation Features: MPO Fiber Optic Pigtails connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at one end. The type of cable fiber and connector and the length of the pigtails can be freely specified by the customer • Fiber type is a Single mode fiber G652D, G657A1 and G657A2, Multimode fiber OM1, OM2, OM3 and OM4 are available • Fiber Optic Pigtail length 1, 1.5, 2 and 3meter other length are available • Available for multi-cores • Low insertion loss and high return loss, high dense connection, easy for operation • 100% factory transmission tested per ANSI/TIA-568-C.3 • Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and cord assemblies • IEC 874-1 Generic specification for fiber optic connectors and cables • ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173 • High reliability • Customer lengths and connectors are available upon request Mechanical Performance Test compliance: Fiber Mode: Single mode or Multi mode Connector type: SC, FC, ST, LC, MTRJ, MPO etc. Cable Diameter: 0.9mm or 1.6mm Polish Interface Type: PC, UPC, APC Jacket Color: SM ”Yellow”, OM2 ”Orange”, OM3 :Aqua”, OM4 ”Pink” Insertion Loss: SM ≤0.2dB, MM ≤0.3dB Return Loss: SM ≥60dB, MM ≥20dB Operation Temperature: -20 to +70°C Storage Temperature: -40 to +85°C