Patch Cords - Lenora Innovation

Patch cables, also called Ethernet patch cords, are short lengths of Cat6/6A, or Cat7/7A shielded or unshielded twisted-pair used to connect active devices to networks. IT administrators also use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch.

Cat6 U/UTP Patch Cord

Introduction: Category 6 U/UTP ethernet patch cables, also called Cat.6 U/UTP ethernet patch cords, are short lengths of Cat6 used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 6 U/UTP ethernet patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 U/UTP CAT6 Patch cord with RJ45 Connector and ethernet cable UTP cat6 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3 and 1000BASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat6 F/UTP Patch Cord

Introduction: Category 6 F/UTP ethernet foiled patch cables, also called Cat.6 F/UTP ethernet foiled patch cords, are short lengths of Cat6 used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 6 F/UTP ethernet foiled patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 F/UTP CAT6 Patch cord with RJ45 Connector and ethernet cable UTP cat6 foiled 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3 and 1000BASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat6 SF/UTP Patch Cord

Introduction: Category 6 SF/UTP ethernet Shielded patch cables, also called Cat.6 SF/UTP ethernet Shielded patch cords, are short lengths of Cat6 used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 6 SF/UTP ethernet Shielded patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 SF/UTP CAT6 Patch cord with RJ45 Connector and ethernet cable UTP cat6 Shielded 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3 and 1000BASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat6A U/UTP Patch Cord

Introduction: Category 6A U/UTP ethernet patch cables, also called Cat6A U/UTP ethernet patch cords, are short lengths of Cat6A used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 6A U/UTP ethernet patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 U/UTP CAT6A Patch cord with RJ45 Connector and ethernet cable UTP cat6A 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3, 1000BASE-T Ethernet IEEE802.3 and 10GBASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat6A F/UTP Patch Cord

Introduction: Category 6A F/UTP ethernet foiled patch cables, also called Cat6A F/UTP ethernet foiled patch cords, are short lengths of Cat6A used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 6A F/UTP ethernet foiled patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 F/UTP CAT6A Patch cord with RJ45 Connector and ethernet cable UTP cat6A foiled 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3, 1000BASE-T Ethernet IEEE802.3 and 10GBASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat6A SF/UTP Patch Cord

Introduction: Category 6A SF/UTP ethernet Shielded patch cables, also called Cat6A SF/UTP ethernet Shielded patch cords, are short lengths of Cat6A used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 6A SF/UTP ethernet Shielded patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 SF/UTP CAT6A Patch cord with RJ45 Connector and ethernet cable UTP cat6A Shielded 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3, 1000BASE-T Ethernet IEEE802.3 and 10GBASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat7 SF/UTP Patch Cord

Introduction: Category 7 SF/UTP ethernet Shielded patch cables, also called Cat7 SF/UTP ethernet Shielded patch cords, are short lengths of Cat7 used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 7 SF/UTP ethernet Shielded patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 SF/UTP CAT7 Patch cord with RJ45 Connector and ethernet cable UTP cat7 Shielded 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3, 1000BASE-T Ethernet IEEE802.3 and 10GBASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat7A SF/UTP Patch Cord

Introduction: Category 7A SF/UTP ethernet Shielded patch cables, also called Cat7A SF/UTP ethernet Shielded patch cords, are short lengths of Cat7A used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 7A SF/UTP ethernet Shielded patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 SF/UTP CAT7A Patch cord with RJ45 Connector and ethernet cable UTP cat7A Shielded 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 24AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3, 1000BASE-T Ethernet IEEE802.3 and 10GBASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 24AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 6.2mm ± 0.2 mm

Cat8 SF/UTP Patch Cord

Introduction: Category 8 SF/UTP ethernet Shielded patch cables, also called Cat8 SF/UTP ethernet Shielded patch cords, are short lengths of Cat8 used to connect active devices to the networks. IT administrators use patch cables to connect two or more “backbone” devices such as switch to switch, or patch panel to switch. Patch cables not only send data signals, but also carry PoE or Power over Ethernet to power a remote device. Application: Businesses use Ethernet patch cabling in office buildings, data centers and users, primary considerations determine ethernet patch cable to use for your business. Ethernet patch cables need stranded copper wires inside for flexibility. Patch cables may be moved periodically, and stranded copper resists breakage, while solid copper may develop stress fractures from bending. • Ethernet Networking • Computer Networking Project • Audio & Data Transmission • Digital Networking • Broadband Networking Communication Operation Features: The Category 8 SF/UTP ethernet Shielded patch cables are available in several versions with cable color and length 0.5, 1, 3 and 5M • RJ45 SF/UTP CAT8 Patch cord with RJ45 Connector and ethernet cable UTP cat8 Shielded 4 pairs copper twist wire patch cord • Standards UL444/CSA-C22.2 No 214, Type CM EIA/TIA-568A and EIA/TIA-568B.2, Horizontal cable, available in CMR and CMP • Conductor 23AWG Stranded soft circle twisted bare copper wire • Jacket PVC or LSZH • Connector RJ45 8P8C golden type • Application 10BASE-T Ethernet IEEE802.3, 100BASE-T Ethernet IEEE802.3, 1000BASE-T Ethernet IEEE802.3, 10GBASE-T Ethernet IEEE802.3 and 25/40GBASE-T Ethernet IEEE802.3 • Rating Temperature: 60°C • 100% component test to guarantee the quality Mechanical Performance Test compliance: Standards: ANSI/TIA/EIA-568-C.2 (T568A & T568B) ISO/IEC 11801 ANSI/TIA-1096-A (FCC Part 68) EN50173-1:2011 UL 444. Type CM, CMR or CMP Conductors: 23AWG stranded bare copper Outer Jacket: PVC or LSZH Outer Cable Diameter: 8.2mm ± 0.2 mm